Hangcha CPCD30-XFForklift

Name: Hangcha CPCD30-XF
Brand: Hangcha

XF Series

Fuel Type

Diesel

Mast Type

Wide View Duplex or Triplex

Lift Speed

98 ft/min

Lift Height

118 in / 3000 mm (Standard)

OEM-Compatible PartsFast ShippingExpert Support

Product Overview

The Hangcha CPCD30-XF is a heavy-duty 6,000 lb diesel pneumatic forklift engineered for demanding material handling operations. Built on the proven XF Series platform with the Kubota V2607-CR-E5B Tier 4F engine, this machine handles heavier loads with confidence in lumber yards, steel service centers, and heavy manufacturing facilities. The extra capacity combined radiator with serpentine wave design and optimized heat dissipation channels ensure reliable engine cooling even in continuous heavy-duty applications. The load sensing hydraulic control system maximizes lifting efficiency while minimizing fuel consumption. Scheduled maintenance of hydraulic components—including return oil filters, load sensing valves, and the electro-hydraulic proportional control system—prevents costly downtime in high-utilization operations.

Key Features

6,000 lb Heavy Capacity - Kubota Tier 4F Power
Extra Capacity Combined Radiator - Heavy Duty Cooling
Wet Disc Brakes for Demanding Applications

Technical Specifications

Specification	Value
Fuel Type	Diesel
Mast Type	Wide View Duplex or Triplex
Lift Speed	98 ft/min
Lift Height	118 in / 3000 mm (Standard)
Load Center	24 in (610 mm)
Engine Model	Kubota V2607-CR-E5B
Engine Power	50.2 hp @ 2400 rpm
Gradeability	20% (Loaded)
Transmission	Hangcha Powershift
Travel Speed	11.5 mph (Unloaded)
Load Capacity	6,000 lbs (3,000 kg)
Overall Width	48.2 in (1,224 mm)
Overall Length	107.5 in (2,730 mm)
Service Weight	9,570 lbs (4,341 kg)
Emission Standard	EPA/CARB Tier 4F

Download Full Specification Sheet (PDF)

Available Parts

Need Parts for CPCD30-XF?

We have direct access to the complete Hangcha parts catalog. Tell us what you need and we'll source it at competitive prices.

Customer Reviews

No reviews yet for the Hangcha CPCD30-XF. Operated or serviced one? Be the first to share how it holds up.

Fault Codes & Troubleshooting

Search for error codes displayed on your CPCD30-XF to find causes and solutions. Click on any code to expand details.

Showing 19 of 19 fault codes

Code	Description	Solution	Guide
1	Battery Overvoltage Protection	Check battery connections. Verify battery voltage level. Replace controller if needed.	View Guide
10	Pump Motor Power Module Overheat	Check heat dissipation. Apply thermal grease. Reduce duty cycle.	View Guide
12	Battery Low Voltage Alarm	Charge battery above reset value.	View Guide
13	Drive Motor Overheating Alarm	Check motor temperature sensor. Allow motor to cool. Check for brake locking.	View Guide
14	Pump Motor Overheating Alarm	Check potentiometer reset. Verify cooling. Replace temperature sensor if faulty.	View Guide
15	Drive Motor Current Loss	Check 26-pin cable connections. Replace power module if needed.	View Guide
17	Main Contactor Coil Overcurrent	Check for external short. Replace contactor.	View Guide
2	Battery Undervoltage Protection	Check battery wiring. Verify positive/negative contacts not corroded. Charge or replace battery.	View Guide
20	Drive Motor Power Module Overheat	Check heat dissipation and thermal grease. Check motor operation.	View Guide
3	Accelerator Depressed Before Start	Release accelerator and restart. Recalibrate accelerator if needed.	View Guide
37	Control Unit 5V Output Fault	Check for 5V ground short. Verify encoder wiring.	View Guide
38	Control Unit 12V Output Fault	Check for 12V ground short in accelerator, sensors, or instrument.	View Guide
5	Flash Fault Alarm	Restore system defaults via monitoring software. Replace controller if unresolved.	View Guide
6	Precharge Capacitor Low Pressure	Check main contactor coil connections. Verify contactor operation.	View Guide
61	Drive Motor Overheat Shutdown	Stop operation. Allow significant cooling. Check sensor and cooling.	View Guide
74	Drive Motor Encoder Fault	Check encoder connections and wiring. Replace encoder if faulty.	View Guide
8	Drive Motor Power Module Overcurrent	Check motor UVW connections for shorts. Verify motor parameters.	View Guide
92	Pedal Accelerator Fault	Recalibrate accelerator. Check wiring. Replace pedal if needed.	View Guide
98	Capacitor Precharging Too Slow	Check power module connections. Replace modules one by one to isolate.	View Guide

Can't find your error code?

Our technical support team can help diagnose issues and recommend parts.

Keep Your CPCD30-XF Running

ChinaLiftSupply stocks thousands of aftermarket and OEM-compatible parts for Hangcha equipment. Get competitive pricing, fast shipping, and expert technical support.

Browse All Hangcha Models